Aerospace Blind Rivets * GB2581
CHERRYMAX® HUCKMAX® ALLMAX® NAS9301 12
-
UNIMATIC® BLIND RIVET NAS1919S & U NAS1921S & U
-
UNIMATIC BLIND BOLT MAXIBOLT® MS21140/1 S & U MS90353/4 S & U
5/16 -3/8"
"A" CODE CHERRYLOCK "A" NAS1398A NAS1399A
-
GROUND STUD BACS53B1EA1/2
-
ASP® 2 ASP ASP FF ASP F ASP LC
CHERRYMAX®, CHERRYLOCK®, MAXIBOLT®, and MBC® are registered trademarks of Cherry Aerospace Fasteners. HUCKMAX®, ASP®, and UNIMATIC® are registered trademarks of Arconic Inc. ALLMAX® is a registered trademark of Allfast Fastening Systems, Inc. UAB™ is a trademark of Arconic Inc.
A dash (-) indicates the tool will install that fastener but it is not the most cost-effective solution.
MOST TOOLS ARE AVAILABLE WITH PISTOL GRIP (SH) AND IN-LINE SPLIT SYSTEMS (SR) AND/OR VACUUM COLLECTOR SYSTEMS.
*RECOMMENDED FOR HIGH PRODUCTION APPLICATIONS. GB940 (ELECTRIC) OR GB910 (AIR) POWERUNIT REQUIRED
LGPL® Lightweight Groove Proportioned Lockbolt
5/16 Inch - 3/8 Inch
GPL® Groove Proportioned Lockbolt
5/16 Inch - 3/8 Inch
MLGPL® Metric Lightweight Groove Proportioned Lockbolt
8mm - 10mm
MGPL® Metric Groove Proportioned Lockbolt
8mm - 10mm
NAS TENSION
5/16 Inch - 3/8 Inch
NAS SHEAR
5/16 Inch - 3/8 Inch
LGPL®, GPL®, MLGPL®, and MGPL® are registered trademarks of Arconic Inc.
MOST TOOLS ARE AVAILABLE WITH PISTOL GRIP (SH) AND IN-LINE SPLIT SYSTEMS (SR) AND/OR VACUUM COLLECTOR SYSTEMS.
*RECOMMENDED FOR HIGH PRODUCTION APPLICATIONS. GB940 (ELECTRIC) OR GB910 (AIR) POWERUNIT REQUIRED
**GB204 AND GB205 HYDRAULIC INSTALLATION TOOLS ARE RECOMMENDED FOR OFFSET AND CLOSED ACCESS APPLICATIONS
Commercial Blind Rivets for *GB2581
POP® is a registered trademark of Emhart Teknologies. Monobolt® and Klamp-Tite® are registered trademarks of Avdel UK Limited. Bulb-tite® is a registered trademark of GESIPA Fasteners USA, Inc. Floor-Tight® and Magna-Lok® are registered trademarks of Arconic Inc.
MOST TOOLS ARE AVAILABLE WITH PISTOL GRIP (SH) AND IN-LINE SPLIT SYSTEMS (SR) AND/OR VACUUM COLLECTOR SYSTEMS.
*RECOMMENDED FOR HIGH PRODUCTION APPLICATIONS. GB940 (ELECTRIC) OR GB910 (AIR) POWERUNIT REQUIRED
Commercial Lockbolts for *GB2581
Magna-Grip® Maxlok®
3/8 Inch
Lockbolt C50L® LD AVDELOK®
5/16 Inch - 3/8 Inch
Magna-Grip®, C50L®, and BOM® are registered trademarks of Arconic Inc. Maxlok®, LD Avdelok® and Avbolt® are registered trademarks of Avdel UK Limited
*RECOMMENDED FOR HIGH PRODUCTION APPLICATIONS. GB940 (ELECTRIC) OR GB910 (AIR) POWERUNIT REQUIRED.
[ITEMPRICE]