Power Insert Tools

Recoil / Helicoil Insert Power & Hand Tools

Kato / Recoil Insert Power and Hand Tools are available in UNC & UNF sizes #2 - 1/2" and up to 12mm, for rapid installation of inserts. Power Tools consist of a front end assembly, an adapter and a reversible air motor. All three components are ordered separately. A Front End Assembly consists of a prewinder, mandrel, and spacers.

The various designs of KATO installation tools are shown in the resource center corresponding to the active insert. Generally, finer pitch inserts are proportionately larger in the free state than the coarse pitch inserts and thus have to be "pre-wound" to a smaller diameter for installation. Large coarse pitch inserts (and 2-56 and 3-48 inserts) need only a threaded mandrel tool for installation.


Part Numbers

For fast and accurate part numbers and technical information on specific inserts try out the KATO Product Wizard.


Tool Type1
(Tangless/Tanged)
Tool Style2Thread Designation3Size Designation4Component / Replacement Part5
Blank for CoilThread (Tanged)KHE - KATO Hex ElectricC - Unified CoarseChart BelowG - Nylon Guard (where applicable)
2 - Prefix for CoilThread II Tangless InsertsKPE - KATO Prewinder ElectricF - Unified FineH - Adjusting Sleeve Housing without Nylon Guard (where applicable)
KRE - KATO Round ElectricM - MetricM - Mandrel/Mandrel Assembly
 S - Spacer Set (includes 3 spacers + 1 thick shim + 3 thin shims, where applicable)



Prewinder Electric Tool Part Numbers

Thread
Size1
Tangless
Front End
Assembly
Tangless
Replacement
Pawl
Tanged
Front End
Assembly
SBT-50 Power
Transformer2
Electric
Driver
Prewinder
Adapter
Unified Coarse
2-562KPEC-022KIPC-02KPEC-02CT5407CT5408CT5408-PA
4-402KPEC-042KIPC-04KPEC-04
6-322KPEC-062KIPC-06KPEC-06
8-322KPEC-22KIPC-2KPEC-2
10-242KPEC-32KIPC-3KPEC-3
1/4-202KPEC-42KIPC-4KPEC-4
Unified Fine
10-322KPEF-32KIPF-3KPEF-3CT5407CT5408CT5408-PA
1/4-282KPEF-42KIPF-4KPEF-4
Metric Coarse
M2.5X.452KPEM-2.52KIPM-2.5KPEM-2.5CT5407CT5408CT5408-PA
M3X.52KPEM-32KIPM-3KPEM-3
M4X.72KPEM-42KIPM-4KPEM-4
M5X.82KPEM-52KIPM-5KPEM-5
M6X12KPEM-62KIPM-6KPEM-6

Notes

  1. The Front End Assembly is designed to work with 1, 1.5, and 2 Diameter inserts. For 2.5, and 3 Diameter. Inserts, please contact KATO for availability.
  2. Use CT5407-EU for European model (240V).
Products (Total Items: 261)
More results: 1 2 3 4 5 6 7 ...18 Next Page View All
Kato Prewinder Electric Tool 8-32 Tangless Front End Assembly
Average Rating(0)
( 0 In Stock )
Your Price: $642.86
Currently On Backorder. Please See Substitute/Alternative Items Below
Kato 2KIPC-2K, Recoil Tool Part, Spare Pawl Kit, Spare Pawl & Kits, 2Kip Series
Average Rating(0)
( 0 In Stock )
Your Price: $45.00
Currently On Backorder. Please See Substitute/Alternative Items Below
Kato 2KIPC-06K, Recoil Tool Part, Spare Pawl Kit, Spare Pawl & Kits, 2Kip Series
Average Rating(0)
( 15 In Stock )
Your Price: $45.00
Availability
Kato® 2KPHC-2 Captive Sleeve Style 1, Prewinder Hand Tool, Tangless Inserts, #8-32 UNC
Average Rating(0)
( 49 In Stock )
Your Price: $178.3467
Availability
Kato 2KPHC-02, Recoil Manual Tool, 2-56 Prewinder Hand Tool, Hand Prewinder, Kph Series
Average Rating(0)
( 0 In Stock )
Your Price: $178.3467
Currently On Backorder. Please See Substitute/Alternative Items Below
Recoil® TL55050 Front End Assembly, Tangless Pneumatic Installation Tool, M5 x 0.8 Metric Coarse, Kato 2KPAM-5
Average Rating(0)
( 0 In Stock )
Your Price: $253.9143
Currently On Backorder. Please See Substitute/Alternative Items Below
More results: 1 2 3 4 5 6 7 ...18 Next Page View All
Browse By Category