Huck Model 2012 Pneaudraulic Unit Rivet Tool

STROKE: 0.650 in (1.65 cm)

WEIGHT: 2012: 4.4 lbs (1.99 kg)

2012B & 2012V: 4.7 lbs (2.13 kg)

MAX AIR PRESSURE: 90 psi (6.2 bar)

MAX FLOW RATE: 2.9 scfm (170 l/min)

POWER SOURCE: 90 psi (6.2 bar) maximum shop air

MAX OPERATING TEMP: 125° F (51.7° C)

PULL CAPACITY: 2670 lbs @ 90 psi (11.88 kN @ 6.2 bar)

HYDRAULIC FLUID: Hydraulic fluid shall meet DEXRON ® III, DEXRON VI, MERCON ® , Allison C-4 or equivalent Automatic Transmission Fluid (ATF) specifications. Fire-resistant fluid may be used if it is an ester-based fluid such as Quintolubric ® HFD or equivalent. Water-based fluid shall NOT be used as serious damage to equipment will occur

The 2012 models are lightweight, high-speed production tools that install:

-04 through -06 diameter HUCK-CLINCH ® fasteners, and oversize HUCK-CLINCH fasteners

-04 through -06 diameter Huck UNIMATIC blind rivets

Huck 2012 Nose Selection Aerospace: