Gage Bilt GB756MGK Trailer and Cab Riveting Kit
GAGE BILT now offers a complete installation kit for 3/16” thru 3/8" MAGNA-GRIP® and Maxlok® lockbolts. The GB756MGK comes with a GB756 installation tool and a set of straight noses to install 3/16, 1/4, 5/16 & 3/8 diameters.
Complete installation kit for 3/16 Inch thru 3/8 Inch MAGNA-GRIP® and Maxlok® lockbolts. The GB756MGK comes with a GB756 installation tool and a set of straight noses to install -6, -8, -10 & -12 diameters.
The GB756 is a hydraulic installation tool designed specifically for the efficient installation of a wide range of blind, lockbolt and Magna-Grip® fasteners thru 3/8" diameter. It weighs 11.1 lbs. (5.0kg) and can be operated in any position with one hand. It has a .960" (24.4mm) rivet setting stroke and a rated pull load of 10,000 lbs (44.5kN).
The GB756 riveter operates with 90 to 100 psi (6.2-6.9 bar) of air. At 90 psi. (6.2 bar) air pressure, the GB756 does not exceed 81.5 db (A) and consumes 6.0 cfm at 20 cycles per minute. The air inlet is provided with 1/4-18 female pipe threads for accepting the user's air hose fitting. Nose Assemblies that were designed for the model 353 installation tool mount directly on the GB756 without the use of an adapter.
Nose Assemblies that were designed for the model 352 installation tool will attach to the GB756 with the use of the 353352 nose assembly adapter.
- Commercial & Aerospace Lockbolt tool
- C6L® thru 3/8"
- BOM® thru 5/16"
- MAGNA-GRIP® thru 3/8"
- Blind Rivet & Blind Bolt thru 3/8"
- Accepts 1 1/16" diameter Gage Bilt & Huck® noses
- LOAD: 10,000 lbs
- STROKE: .960"