1. Home
  2. Rivets - Inserts and Bolts
  3. Blind Rivets and Fasteners
  • Open End Rivets Open End Rivets
    Open End Blind Rivets are for fastening where there is no access to the opposite side of work. Open End Blind Rivets are simple to install with either hand tools, battery-powered tools, and pneumatic tools. Rivets come in a wide variety of head styles and lengths available from 3/32" to 1/4" diameters.
  • Closed End Rivets Closed End Rivets
    • Moisture-resistant due to closed-end • Greater shear and tensile strength • The mandrel is retained 100% of time • 1/8" to 1/4" diameters
  • Brass - Copper Rivets Brass - Copper Rivets
    • For blind fastening where there is no access to the opposite side of work • Simple to install • Wide variety of head styles and lengths available from 3/32" to 1/4" diameters • Blind Rivets are Available in Both Brass and Copper
  • Peel Type / Load Spreading Rivets Peel Type / Load Spreading Rivets
    Rivets are designed especially for plastics and other brittle or soft materials, with a second head that forms large "folds." This provides a larger bearing surface that resists the pull-through or cracking that can occur in some materials with a standard rivet. Purchase peel-type blind rivets in bulk online.
  • Pull-Thru Pull-Thru
    The Pull-Thru (PT) rivet is a steel countersunk blind fastener designed to set surface flush on both sides of an application (blindside protrusion < 0.4mm/0.015"). The PT rivet is best used in the assembly of any product where clearance is extremely limited and protrusion of the rivet body from the application surface must be either minimized or eliminated. As the PT rivet sets, the mandrel head remains integral with the mandrel, assuring no loose mandrel heads in the assembled product. These features and benefits make the PT rivet unique in the marketplace.PT rivets are widely used in the electronics industry where space is at a premium but also lend themselves to many low-clearance industrial applications.
  • Q-Lok Rivets Q-Lok Rivets
    Q-Lok Rivets have a retained mandrel which increases shear and tensile strength. Use these in high vibration applications. The mandrel on the Avdel Q-Lok rivet breaks flush when used in the mid-grip range. Q-Lok Rivets are also moisture-resistant due to the tight seal.
  • Multi Grip Rivets Multi Grip Rivets
    Multi-Grip rivets are hole filling, non-structural break stem rivets with a long and reliable track record in a wide range of applications and industries. Multi-grip means the rivet has the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary. Hole filling means the rivet will expand radially into the application hole to provide a strong, vibration resistant joint and compensate for irregular, oversized, slotted or misaligned holes. Also, it can stop sheet movement in applications with non-standard holes.
  • Bulb Tite Rivets Bulb Tite Rivets
    Bulb-Tite blind rivets cover larger clamping ranges. Fewer dimensions are required thereby reducing handling and warehouse costs. Application areas Fassades, shipbuilding, containers, truck and passenger busses production, trailers, trapezoidal sheet metal roof. The advantages are Large grip range, Vibration-proof, Use on straight and curved application parts, Waterproof with neoprene sealing washer, Large distribution of the grip force over a large surface. Shop waterproof blind rivets today.
  • Magna Bulb Magna Bulb
    Huck Magna-Bulb® rivets utilize a unique bulbing action that creates a stronger connection in your applications. With the Magna-Bulb®, Huck has created something weather and vibration-resistant to stand up to the harshest conditions and remain secure.
  • T-Rivets T-Rivets
    T rivets are made with an aluminum/steel material combination, with a split forming a "T" pattern which creates a wide bearing surface while maintaining large clamp up and shear strength.
  • Plastic Rivets Plastic Rivets
    Plastic/Nylon rivets are made of a precision-molded, all-nylon material. When installed they offer a secure lock preventing pull out. These rivets are great for fastening plastic to plastic, plastic to metal or plastic to fiberglass. Plastic/Nylon rivets are ideal for non-conductive and non-corrosive environments.
  • Automotive Rivets Automotive Rivets
    Blind Rivet Supply carries a wide line of small flange rivet used primarily for fastening decorative materials on boats, automobiles, trucks & other motor vehicles. These are best suited to applications where a discreet, secure installation of non-critical components is needed. These are normally used as window regulator rivets to specialized door handles.
  • Interlock / Magna Lok Style Rivets Interlock / Magna Lok Style Rivets
    Structural blind rivets, also known as Interlock Style Rivets, have a permanently retained mandrel, hole filling, multi-grip and are high strength providing increased shear and tensile values. These structural rivets are used in high-vibration applications and provide a weather-resistant joint for further protection in both metal to metal and metal to plastic applications. Interlock rivets are sold under many brand names like Magna-Lok, Kliklock, Interlock, Ultragrips, Go-Lock, Tigerbolt, Monobolt and many more.
  • Avdel Avseal Avdel Avseal
    The range of Avseal blind sealing plugs is unique in the efficient sealing performance provided in low- and high-pressure hole sealing applications. The rapidly installed two-piece plug offers technical characteristics that: • Greatly improve quality and safety in demanding applications • Simplify hole preparation and the installation process • Offer an increased number of potential applications • Lower assembly costs
  • Monobolt Monobolt
    The Monobolt® rivet is a hole filling, multi-grip, structural breakstem rivet available in steel or aluminum construction. Multi-grip means the rivet has the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary. Hole filling means the rivet will expand radially into the application hole to provide a strong, vibration resistant joint and compensate for irregular, oversized, slotted or misaligned holes. Also, it can stop sheet movement in applications with non-standard holes.
  • Avdel Avdelok Avdel Avdelok
    The Avdelok® lockbolt is a two-piece assembly consisting of a bolt and collar. Although they are in the blind fastener family, they are not blind fasteners as access is required from both sides of the workpiece to install the bolts and collars. They provide higher shear strength, tensile strength, clamp load and vibration resistance than most other products in the Avdel® blind fastener family. Material options include aluminum, steel and stainless steel with diameter ranges of 3/16" to 3/8". The Avdelok® lockbolt fastening system relies on the proper installation of the collar onto the bolt for maximum joint performance.
  • Avdel Avtronic Avdel Avtronic
    The Avtronic® fastening system is designed to provide a superior attachment of through-hole or surface mount connectors to printed circuit boards without the risk of cracking brittle connector material. Annular grooves on the Avtronic® rivet shell allow for the stress relief of mating material, thus eliminating the cracking of brittle connector bodies. The Avtronic® fastener is available in two diameters, which meet standard hole sizes specified in DIN and other commonly used connectors. Additionally, nine lengths are available to accommodate any combination of PC board thickness and connector configuration.
  • Avdel Avlug Avdel Avlug
    The Avlug® speed fastener is a unique assembly system designed as secure, easy-to-solder terminal posts for PCB's. Made from brass, the Avlug® has a hot tin dipped coating to accept solder, while the knurled shank provides a secure assembly by pressing into the application material. The Avlug® rivet is not intended to fasten multiple sheets together and should only be applied to single sheet thicknesses. Therefore, the application parameters must meet the specified ranges to ensure proper installation and performance.
  • Avdel Briv Avdel Briv
    The Briv® rivet is a high clench speed fastening rivet offering the greatest variety of any Avdel® speed fastener. It is available in aluminum, brass, steel or stainless steel construction and sizes of 3/32", 1/8", 5/32" and 3/16". The Briv® rivet has a shouldered end, which expands against the rear application sheet during installation. The Briv® rivet relies on this bulbing tail formation to create extremely high clench and joint strength. This makes the Briv® rivet ideal for use in thin sheet, soft, brittle and low strength materials, as well as resulting in high resistance to pull-out loads.
  • Avdel Chobert Avdel Chobert
    The Chobert® rivet is the original speed fastener. It is available in aluminum, brass or steel construction and sizes of 3/32", 1/8", 5/32", 3/16" and 1/4". It can be used in blind holes and is an ideal pivot pin or hose tail. Additionally, it offers lower in-place costs than welding or nail rivets. The Chobert® rivet is primarily a hole filling rivet meaning it will expand radially into the application hole. The rivet does not collapse or shorten during installation. Maximum performance is realized by the interaction of the tapered inner diameter of the rivet body and the flared shape of the mandrel head. The flared mandrel head passes through the tapered bore expanding the rivet fully against the application hole and surrounding material.
  • Avdel Grovit Avdel Grovit
    The Grovit® rivet is a speed fastening rivet designed for blind holes in thicker gauge plastics, fiberglass, aluminum alloy and similar materials. It is available in aluminum or steel construction and sizes of 3/32", 1/8", 5/32" and 3/16". Annular grooves on the rivet body expand within the host material to provide a secure anchorage. The grooves are, by design, wide and deep, which allows the application material to flow easily into the grooves. This stress-relieving effect eliminates potential cracking problems in soft or brittle material. Due to the precise design of the Grovit® rivet, the application parameters must meet the specified ranges to ensure proper installation and performance.
  • Avdel Neospeed Avdel Neospeed
    The new range of NeoSpeed® rivets takes Avdel® Speed Fastening technology to the next level. The Neospeed® rivet is a multi-grip, hole filling rivet available in aluminum and steel construction in diameter sizes of 1/8", 5/32" and 3/16". Multi-grip means the rivet has the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary.
  • Avdel Riv Screw Avdel Riv Screw
    The Rivscrew® rivet is a threaded, removable speed fastener that combines the speed of rivet placement with the removability of a screw. It is available in steel construction in sizes of 2.8mm, 3mm, 3.5mm, 4mm, and 4.8mm. The Rivscrew® rivet is installed using a hexagonal-shaped mandrel. During installation, the mandrel expands the rivet body radially adjacent to the six corners of the hexagonal shape. This forces the threads on the rivet body into the application forming a thread in the material. Thread forming in this manner a provides higher vibration resistant "thread lock" in the parent material compared to standard screws, while eliminating the need for costly tapping or thread-forming operations.
  • Rivet Burrs - Backup Washers Rivet Burrs - Backup Washers
    Back up washers/burrs are ideal for soft materials and oversized holes when setting blind rivets
  • Mate Rivet Mate Rivet
    The Rivet Mate or Mate Rivet is a Cherrymate style rivet, capable of fastening multiple components up to two inches thick. Mate rivets consist of a male blind rivet and a female semi-tubular rivet. Cherrymate rivets are used in sets in assemblies where you have access to both sides. You can control the tension of the fastener which is good for plastic assembly and hinge points where you need strength but allows the assembly to move. Available in aluminum or steel in grip ranges from 3/4" to over 2".

Products [144]

BR-M70317
(0)
( 0 Available )
$148.94
Currently On Backorder. Please See Substitute/Alternative Items Below
BR-BSCS-04-06
(0)
( 0 Available )
$0.0111
Currently On Backorder. Please See Substitute/Alternative Items Below
BR-AB6-6
(0)
( 0 Available )
$0.0537
Currently On Backorder. Please See Substitute/Alternative Items Below
TOP
0 Items