Avdel® Klamp-Tite® BAPKTR-06-09 Blind Rivet; 3/16 Inch (0.187 Inch), (0.375 - 0.562 Inch Grip), Protruding Head, Aluminum, Plain Finish

The structural Klamp-Tite rivet is an aluminum alloy, breaks them rivet with a split tail formation where the rivet body collapses into three legs or petals. This unique collapse pattern provides a wider than normal grip range and a larger than normal blind side footprint. The wider than normal grip range provides the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary. The large blind side footprint is often referred to as a large secondary head and creates a load-bearing surface that absorbs the force of setting the rivet. Otherwise, the setting force, or clamp load, could accumulate in the application material and might damage the material. The design and fashion in which the rivet body collapses prevents any radial expansion of the rivet into the application hole another safeguard against damage to the application material. The combination of large blind side bearing surface and lack of radial expansion makes Klamp-Tite® ideal when application materials are so soft or brittle that the tensile force exerted by a conventional rivet would cause damage. This typically includes a thin sheet, soft, brittle, and low strength materials.

• Spreads the tail bearing load/clamp on the rear sheet
• Ideal for use in thin sheet materials offering high resistance to pull-out loads
• Multi-grip capability accommodates wide variations in material thickness
• Ideal for use in very soft or brittle materials
• The stem is mechanically locked into the body providing very strong, vibration resistant joints
• Visible lock for quick and easy inspection
• Optional underhead washer provides a waterproof seal