Avdel Briv 01821-00406-38 Speed Fastener; 1/8 Inch (0.125 Inch), (0.085 - 0.135 Inch Grip), Mushroom Head, Steel, Zinc Finish
The Briv® rivet is a high clench speed fastening rivet offering the greatest variety of any Avdel® speed fastener. It is available in aluminum, brass, steel or stainless steel construction and sizes of 3/32", 1/8", 5/32" and 3/16". The Briv® rivet has a shouldered end, which expands against the rear application sheet during installation. The Briv® rivet relies on this bulbing tail formation to create extremely high clench and joint strength. This makes the Briv® rivet ideal for use in thin sheet, soft, brittle and low strength materials, as well as resulting in high resistance to pull-out loads. While it is always recommended that application thickness and hole size meet the specified ranges, several mandrel sizes are available for the Briv® rivet allowing it to be used in applications slightly outside those dimensions.
Avdel® Briv® Speed Fastener, Unit of Measure: Inch, 1/8 Inch Diameter, 0.125 Inch Decimal Equivalent, 3.18mm Nominal Metric Diameter, 0.085 Inch (2.16mm) Minimum Grip, 0.135 Inch (3.43mm) Maximum Grip, 0.085 - 0.135 Inch (2.16 - 3.43mm) Grip Range, Mushroom Head, Steel Body Material, Body Material Detail: Low Carbon Steel SAE 1008/EN 10263-2 C8C (DIN 10263-2 C8C, Qst 34-3), Finish: Zinc, Finish Detail: Zinc Trivalent Chromate, 0.257 Inch (6.53mm) Head Diameter, 0.039 Inch (0.99mm) Head Height, Minimum Drill Hole Size: 0.129 Inch (3.28mm), Maximum Drill Hole Size: 0.132 Inch (3.35mm), Overall Body Length: 0.212 Inch (5.38mm), Body Diameter Before Set: 0.125 Inch (3.18mm), 255 lbf. (1.13kN) Shear Strength, 410 lbf. (1.82kN) Tensile Strength, Fasteners Per Pod: 50